JM Eagle

15 inch 80 PSI P.I.P. Pipe

  • Seated in a deep groove, the flexible elastomeric gasket provides a tight seal that protects the line from shock, vibration and earth movement, and compensates for expansion and contraction of the pipe lengths
  • Quick and easy to assemble with a simple push, there’s no field mixing or application of cement
  • The joint remains tight under normal operating conditions
  • 20 feet in length with a gasketed belled end
  • Rated at 80 PSI (SDR-41))
/per 100 $1,928.46
  • 20


Call for Availability

15 inch 80 PSI P.I.P. Pipe is available to buy in increments of 20

JM Eagle's Irrigation pipe is made in compliance with industry accepted P.I.P. (irrigation) pipe standards. Pipe 6" through 27" in diameter are produced in accordance with the Natural Resources Conservation Service NRCS 430-DD specification and dimensionally comply with Annex A1 of ASTM D2241. Pipes are available in DR 64 (63 psi), DR 51 (80 psi), DR 41 (100 psi), and DR 32.5 (125 psi). PVC compounds used in the extrusion of this pipe meet or exceed the requirements of ASTM D1784 cell class 12454. Joint design is tested to the requirements of ASTM D3139 with rubber gaskets that conform to ASTM F477.

Available in 6" through 27" diameter sizes, this pipe can be connected directly to most existing irrigation equipment. It can also be connected into I.P.S. cast/ductile iron fittings with the appropriate adapters and/or transition gaskets.

JM Eagle's Ring-Tite™ joint can be assembled quickly. Seated in a deep groove, the flexible elastomeric Rieber® gasket provi

Only In Stores Yes
Primary Material PVC
Pipe Type Low Pressure Gasketed
Primary Size 15 in.
Potable Water No
Primary Color White
Minimum Quantity 20.0000
Write Your Own Review
You're reviewing:15 inch 80 PSI P.I.P. Pipe
Your Rating